Generating AXI Strobe based on SIZE, DATA WIDTH

AXI write strobe is generated based on the axi size and data width supported. For example, if the axi interface you are using has 64 bit wide data bus, you can have strobe of 64/8 = 8 Let us take the same data width as an example to produce axi write strobe.

In this case, the strobe is set starting at address offset and continues till the size of the transfer is met.

For example, 

ADDR = 0x3

SIZE    = 0x2 (32 bits)

LEN     = 0x2 (3 beats)

For the first beat, ADDR = 0x3, STRB = 0xF8

For the second beat, ADDR = 0x7, STRB = 0x80

For the third beat, ADDR = 0xB, STRB = 0xF8

 

module top;
  parameter int DATA_WIDTH = 64;
  bit [2:0] aw_size;
  bit [7:0] aw_len;
  bit [31:0] aw_addr;
  bit [7:0] w_strb[$];
  bit [31:0] addr_align;
  
  function automatic bit [7:0] gen_strb ( input bit [31:0] addr, input bit [2:0] aw_size );
    bit [7:0] strb;
    int size_in_bytes = 2**aw_size;
    addr_align = addr % (DATA_WIDTH/8);
    
    
    for( int i=0;i<DATA_WIDTH/8;i++) begin
      if ( i inside {[addr_align:addr_align+size_in_bytes-1]}) strb[i] = 1;
      else strb[i] = 0;
    end
    //$display("ADDR_A:%0h BY:%0d STRB:%0h",addr_align,size_in_bytes,strb);
    return strb;
  endfunction
  
  function automatic void load_strb ( );
    bit [31:0] addr_l;
    for ( int i=0;i<aw_len+1;i++) begin
      addr_l = aw_addr + (i << aw_size);
      w_strb.push_back(gen_strb(addr_l,aw_size));
      $display("ADDR:%0d STRB:%0h",addr_l,w_strb[i]);
    end    
  endfunction
  
  initial begin
    aw_addr = 'h3;
    aw_len  = 'h2;
    aw_size = 'h2;
    load_strb();
  end
  endmodule

RESULT:

Compiler version U-2023.03-SP2_Full64; Runtime version U-2023.03-SP2_Full64; Oct 16 02:13 2025
ADDR:3 STRB:78
ADDR:7 STRB:80
ADDR:11 STRB:78
V C S S i m u l a t i o n R e p o r t